Germany · Strength

gym80

gym80 is made in Gelsenkirchen, Germany, since 1980. The machines are selectorized and plate-loaded strength, built heavy and common in European clubs.

Guide rods, cables and pins are the service parts. The frame rarely is. Record the model so a cable order is for this machine, not for ‘the gym80’.

Parts to write on the job

• Cable

  Write which run you replaced, and whether the rest of the cable stayed. A visible fray is not the whole cable.

• Guide rod

  Record if the rod was cleaned, dressed, or replaced. A stuck stack under load is not cured by telling a member to pull harder.

• Selector pin

  A bent or missing pin takes the machine out of service. Write the pin, not only ‘the stack feels wrong’.

• Bushing

  Play in a pivot is a bushing or a bearing until you look. Write which pivot, and what you fitted.

• Upholstery

  Photograph the pad and name the machine. Recovering ‘the blue one’ is how the wrong bench is sent out.

GymMaintain is not this manufacturer and does not sell their parts. Record the brand and the model on the asset. Record the part you used on the work order, from the old part or the manual, not from a guess.

Related